Alcatel-Lucent 7750 SR OS - Page 407

Filter Policies
7750 SR OS Router Configuration Guide Page 407
entry entry-id — Displays information on the specified IPv6 filter entry ID for the specified filter ID.
Values 1 — 9999
associations — Appends information as to where the IPv6 filter policy ID is applied to the detailed
filter policy ID output.
counters — Displays counter information for the specified IPv6 filter ID.
Output Show Filter (no filter-id specified) — The following table describes the command output for the
command when no filter ID is specified.
Sample Output
A:ALA-48# show filter ipv6
===============================================================================
IP Filters
===============================================================================
Filter-Id Scope Applied Description
-------------------------------------------------------------------------------
100 Template Yes test
200 Exclusive Yes
-------------------------------------------------------------------------------
Num IPv6 filters: 2
===============================================================================
A:ALA-48#
Output Show Filter (with filter-id specified) — The following table describes the command output for
the command when a filter ID is specified.
Label Description
Filter Id
The IP filter ID
Scope Template — The filter policy is of type template.
Exclusive — The filter policy is of type exclusive.
Applied No — The filter policy ID has not been applied.
Yes — The filter policy ID is applied.
Description
The IP filter policy description.
Label Description
Filter Id
The IP filter policy ID.
Scope Template — The filter policy is of type template.
Exclusive — The filter policy is of type exclusive.
Entries
The number of entries configured in this filter ID.
Description
The IP filter policy description.