Alde Compact 3010 - Wiring Diagram and Control Panel

11
US/CAN
Thetemperaturecanbesetfrom+41°F/+5°Cto+86°F/+30°Cinstepsof1,0°F/0.5°C.Hotwaterisalwaysavailable
(122°F/50°C)whentheboilerisonandrunningonLPGasand/orelectricity.Duringsummer,whenonlyhotwateris
required,adjustthetemperaturesettingtowellbelowthesurroundingtemperaturesothatcentralheatingcirculationis
notcalledfor.
1. Thetemperaturedisplayedis
thetemperaturewhichissetat
present
(inthiscase72°F/22.0°C).
2. Raisethetemperatureby
pressingthe+button.Lower
thetemperaturebypressing
the–button.
3. Thesettingsarereadyandthe
centralheatingwillcirculateat
thesettemperature.
Ifyouneedmorehotwater,youcanraisethewatertemperaturetemporarilyfrom122°F/50°Cto149°F/65°C.After30
minutes,theboilerrevertstonormaloperation.Whenyouhaveselectedmorehotwaterthecirculationpumpstops.
1. Increasethequantityofhot
waterbypressingthe+button.
Whenactivatedtheplussym-
bolchangescolortogreen.
2. Thesettingsareready.
1. Resetthehotwaterbypress-
ing the – button.
2. Thesettingsareready.
Ifyouwishtoreverttothebasichotwatersettingsbefore30minuteshaveexpired.
72°F
ON
2
On
Off
72°F
ON
2
On
Off
72°F
ON
2
On
Off
4. Set the required temperature
5. Extra hot water