Alfapilot M16 - Glider Data Input; System Settings Options

12
6.2 Glider Data
In the Wing Data option we can write the wing information that the pilot uses, this information is stored in
the IGC flight file, and in some options when sending reports or flights to XC servers, it consists of:
 Manufacturer: List of Manufacturers.
 Model: this allow us to insert the model of glider.
 FAI Class: FAI-3, FAI-1, FAI-5, FAI-2, FAI-11, FAI-12.
 Certification: LTF 1, LTF 1/2, LTF 2, LTF 2/3, LTF3, EN A, ENB, EN C, EN D, CCC, Proto.
 Category: Sport, Open, Tándem.
 Wing Speed (Km/h)*: Esta speed is indicated by the manufacturer at Hands Free.
 Wing glide Ratio*: The glide ratio indicated by the manufacturer at Hands Free.
 Maximum Wing Speed *: It is the indicated by the manufacturer when we accelerate to the maximum.
 Glide Ratio at Maximum Speed*: The glide ratio of our wing at maximum speed.
* Important to correctly define these values since they are used to perform calculations in the assistants. If you do not know them, you can check
with the manufacturer, or indicate the approximate values.
6.3 System