Need help?Do you have a question about the Alfapilot M16 and is the answer not in the manual?
Controls device power: turn on/off, standby mode, and force shutdown.
Allows GPS sharing with third-party applications and configures related settings.
Details GNSS fix status, satellites in view/used, and position accuracy.
Input personal pilot information for IGC format and XC server configuration.
Enter glider manufacturer, model, FAI class, certification, and performance data.
Access configuration for export/import, SD card, app updates, units, and logs.
Manage system configuration files and external SD card usage.
Adjust Kalman filter for vario and send error logs for support.
Configure vario tone, volume, climb/sink thresholds, and zero band.
Set alerts for events and mute vario when not flying.
Configure sound parameters for ascent (Climb) and descent (Drift).
Adjust start and end frequencies for vario sound, and frequency scale.
Simulate vario sounds to test and adjust settings.
Set up LiveTrack24 and Loctome servers for data transmission.
Send or receive data wirelessly between devices up to 100m.
Import, export, create, and manage WayPoint packages.
Add, manage, and view thermal packages (HotSpots) on the map.
Import and manage airspace packages in .aip or .txt format.
Activate/deactivate maps and configure map display options.
Configure thermal values, takeoff, and landing detection parameters.
Customize, resize, and reposition data fields (widgets) on flight screens.
Create, import, activate, send, edit, export, or delete routes.
Create, import, activate, send, edit, export, or delete competition tasks.
Options for XC flights: Disable, Close Triangle, Back to Takeoff, Get away from Takeoff, WayPoints.
Navigate WayPoints in active routes/tasks; validate or cancel selections.
Advice on avoiding dust, water, falls, and pressure on the device.
Precautions against knocks, excess pressure, extreme temperatures, and screen sensitivity.
To Next Page
General