Alkeria NECTA Series - Ordering Informations; Optional Accessories

2. Introducing NECTA Line Scan Cameras 25
2.3 OPTIONAL ACCESSORIES
NECTA cameras can be completed with the following accessories:
• NAD-C adapter to C-mount lens (see Section 3.4.2)
• NAD-F adapter to Nikon F-mount lens (see Section 3.4.3)
• NIO-x cable for I/O interconnection – 3, 5, 10 m long available (see Section 4.1).
2.4 ORDERING INFORMATIONS
Alkeria has various camera series in its product line: each series has several models, with different res-
olutions, color modes and accessories.
To identify a specic model version, Alkeria uses an internal codename system that allows to describe
every camera specication with a unique code.
Understanding how this code works can be useful to our customers both to identify correctly a camera
and to request information or ordering to our sales department.
Every camera code is composed by the following parts:
Camera model
This is the rst and main part: it includes camera series and information about sensor like resolution and
number of lines.
Color option
The second part, separated by a hyphen, denes the sensor color option for each camera model. In our
product line we use different sensor families, most of them available in color, monochrome or Near-
InfraRed (NIR) mode.
Lens adapter
Last part of the code, indicates which lens adapter the camera is equipped with. It’s the only part that
can be omitted, in the case you’re choosing a camera without any additional lens adapters.
NECTA, 4096 x 2 lines resolution
CAMERA MODEL COLOR OPTION LENS
ADAPTER
7µm pixels, color
F-mount
N4K2-7C-F
Figure 2.3:
NECTA Ordering information