Allen-Bradley MicroLogix 1100 Instruction Set Reference Manual

Publication 1763-RM001C-EN-P - October 2009
604
free running clock status B-476
full-duplex G-593
function files P-49, P-50
base hardware information (BHI) P-56
communications status (CS) file P-57, P-71
event input interrupt (EII) P-272
high-speed counter (HSC) P-90
input/output status file (IOS) P-79
memory module information (MMI) P-54
pulse train output (PTO) P-133
pulse width modulation (PWM) P-150
real-time clock (RTC) P-51
selectable timed interrupt (STI) P-268
future access status bit B-473
G
GCD instruction P-210
GEQ instruction P-182
Gray code instruction P-210
greater than instruction P-181
greater than or equal to instruction P-182
GRT instruction P-181
H
half-duplex D-510, G-594
hard disk G-594
high byte G-594
high-speed counter
Quick Start example
E-544
high-speed counter function file P-90
high-speed counter load instruction P-118
high-speed outputs P-127
housekeeping G-594
HSC
Quick Start example
E-544
HSC function file P-90
HSL instruction P-118
I
I/O G-594
I/O configuration 1-13
I/O forcing 1-25
I/O refresh instruction P-258
identifying controller faults C-491
IIM instruction P-255
immediate input with mask instruction P-255
immediate output with mask instruction P-257
in-line indirection P-336
input and output instructions P-255
input device G-594
input filter selection modified status bit B-479
input filtering 1-25
input scan G-594
input/output status file P-79
inrush current G-594
instruction G-594
instruction execution time A-457
instruction set
definition
G-594
MicroLogix 1500 execution times A-457
overview P-81
INT instruction P-263
interrupt subroutine instruction P-263
interrupts
interrupt instructions
P-263
interrupt subroutine (INT) instruction P-263
overview P-259
selectable timed start (STS) instruction P-264
user fault routine P-262
user interrupt disable (UID) instruction P-265
user interrupt enable (UIE) instruction P-266
user interrupt flush (UIF) instruction P-267
IOM instruction P-257
IOS function file P-79
J
JMP instruction P-249
JSR instruction P-250
jump G-595
jump to label instruction P-249
jump to subroutine instruction P-250
L
label instruction P-250
ladder logic G-595
last 100 µSec scan time status B-484
latching inputs 1-28
LBL instruction P-250
LCD Function File P-445, P-446
CBS P-448
DN P-449
ERN P-450
ERR P-449
ESC P-452
JOG P-451
OK P-452
efesotomasyon.com - Allen Bradley,Rockwell,plc,servo,drive

Allen-Bradley MicroLogix 1100 Specifications

General

Processor	32-bit
Programming Software	RSLogix 500
Mounting	DIN rail or panel mount
Power Supply	24V DC
Type	Compact PLC
Digital Inputs	12
Digital Outputs	8
Analog Inputs	4 (depending on model)
Analog Outputs	Optional with expansion module
Programming Language	Ladder Logic
Operating Temperature	0 to 55 °C (32 to 131 °F)
Series	MicroLogix