EasyManuals Logo

Allen-Bradley PowerFlex 755 User Manual

Allen-Bradley PowerFlex 755
354 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #315 background imageLoading...
Page #315 background image
Rockwell Automation Publication MOTION-UM003K-EN-P - January 2019 315
Out of Box Configuration for PowerFlex Drives Appendix B
Small Jerk rates, rates less than 5% of time, produce acceleration and
deceleration profiles close to rectangular ones, such as the one shown in
Trapezoidal Accel/Decel Time on page 313
.
Calculations are performed when an Axis Move, Change Dynamics, or an
MCS™ Stop of StopType = Move or Jog is initiated.
IMPORTANT Higher values of the % of Time result in lower values of Jerk Rate Limits and,
therefore, slower profiles. See the following table for reference.
Table 69 - Velocity Versus Jerk
Trapezoidal
Velocity Profile
(1)
(1) The example on page 313 (labeled Trapezoidal Accel/Decel Time) uses a rectangular acceleration profile.
S-shaped Velocity Profile
with 1< = Jerk <100% of
Time
(2)
(2) The example on page 315 (labeled Programmable S-curve Accel/Decel Time, Acceleration Jerk = 60% of Time) uses a
trapezoidal acceleration profile.
S-shaped Velocity Profile
with Jerk = 100% of
Time
(3)
(3) The example on page 316 (labeled S-curve Accel/Decel Time, Backward Compatibility Setting: Acceleration Jerk = 100% of
Time) uses a triangular acceleration profile.
Accel/Decel Jerk in
Units/sec
3
Accel/Decel Jerk in
% of Maximum
—0100%
Accel/Decel Jerk in
% of Time
0% 1…100% 100%
Max Accel
2
Max Velocity
to
Max Accel
2
Max Velocity
VelocityAccelJerk
Time
Time
Time
Programmable S-curve Accel/Decel Time,
Acceleration Jerk = 60% of Time
30% 30%40%
% of Time = 60%

Table of Contents

Other manuals for Allen-Bradley PowerFlex 755

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Allen-Bradley PowerFlex 755 and is the answer not in the manual?

Allen-Bradley PowerFlex 755 Specifications

General IconGeneral
CategoryAC Drive
Amperage2.2…1470 A
Output Voltage0 to Input Voltage
Output Current2.2…1470 A
EnclosureIP20, IP30, IP54
CommunicationsEtherNet/IP, ControlNet, DeviceNet
I/ODigital, Analog, Encoder, Relay
SafetySafe Speed Monitor
Protection FeaturesOvercurrent, Overvoltage, Undervoltage, Overload, Short Circuit, Ground Fault, Overtemperature
Operating Temperature-10°C to 50°C (14°F to 122°F)
Storage Temperature-40°C to 70°C (-40°F to 158°F)
Humidity5…95% noncondensing
AltitudeUp to 1000m (3300ft) without derating
Voltage200-240V AC, 380-480V AC, 500-600V AC, 690V AC
Input Voltage200-240V AC, 380-480V AC, 500-600V AC, 690V AC
Control MethodSensorless Vector

Related product manuals