Use the following as guidelines running filling production with the Model VF110-E feeder.
1. Verify that hopper contains sufficient product and that a supply of empty containers are
available.
2. Clear any accumulated product or debris from the weigh bucket area.
3. Turn power on at the Control Panel.
4. Press MAIN and SELECT to choose which Recipe number to use.
5. Reset any accumulated production count statistical totals using the CLEAR STATS
selection.
6. Press MAIN and SETUP. Review relevant setup settings and selections. Correct as
required.
7. From the MAIN screen, press START to select container filling.
8. Verify system operation from the Status Messages appearing at the top of the Main
screen. Status messages are described elsewhere in this manual.
Model VF110-E Touch Screen Control Panel Users Manual
16
AFI Publication 1910817 ● Issue: 1 ● August 2017
Filling Production
To Next Page
Loading...