ALLFILL VF110-E - Cascade Vibration; Cascade Vib on Delay; Bulk Vibration; Dribble Vibration

If the Model VF110-E includes an additional, cascade vibrating pan, this selection provides
access to selections and settings to control the cascade vibrator.
This selection is accessed from the Setup Vibration screen.
Cascade Vib On Delay
The On Delay prevents the cascade feeder from dispensing product at the secondary vibra-
tor for the entered selection. This entry can be used to allow the pan to become evenly dis-
tributed with product at the start of filling.
This selection is accessed from the Cascade Vibration screen.
Factory Setting: 0.000
Valid Entries: 0.000-9.999
Bulk Vibration
Selects the rate of vibration during the first, bulk stage fill of the cascade feeder. Generally,
greater speeds will result in more product, however greater speeds may yield less accuracy
and greater preact (in-flight) amounts.
This selection is accessed from the Cascade Vibration screen.
Factory Setting: 0.00
Valid Entries: 5.000-100.000
Dribble Vibration
Selects the rate of vibration during the second, dribble stage fill of the cascade feeder.
Greater speeds (higher entries) will result in more product.
This selection is accessed from the Cascade Vibration screen.
Factory Setting: 0.00
Valid Entries: 5.000-100.000
Primary Vib
Selection that returns to the primary Setup Vibration screen.
This selection is accessed from the Cascade Vibration screen.
Model VF110-E Touch Screen Control Panel Users Manual
26
AFI Publication 1910817 ● Issue: 1 ● August 2017
Cascade Vibration