ALLFILL VF110-E - Stepper Time; Open Bucket; Close Bucket

Stepper Time
Specifies a time for the bucket to be opened by the Stepper actuator. This selection can be
used to test different time values to increase production rates.
This selection is available from the Test Cascade Vibrator screen.
Factory Setting: 0.000
Valid Entries: 0.050-9.999
Open Bucket
Selection to individually operate the weigh bucket. The bucket can be operated to verify
proper movement, adjustment, and/or testing of weigh bucket air cylinder, linkage, etc.
!!! WARNING !!!
Operation of the Bucket may present a safety hazard. Take appropriate precautions to
protect operating personnel and other equipment when testing this equipment.
Pressing the Bucket Open opens the bucket.
This selection is available from the Test Cascade Vibrator screen.
Close Bucket
Selection to individually operate the weigh bucket. The bucket can be operated to verify
proper movement, adjustment, and/or testing of weigh bucket air cylinder, linkage, etc.
!!! WARNING !!!
Operation of the Bucket may present a safety hazard. Take appropriate precautions to
protect operating personnel and other equipment when testing this equipment.
Pressing the Bucket Close closes the bucket.
This selection is available from the Test Cascade Vibrator screen.
Model VF110-E Touch Screen Control Panel Users Manual
33
AFI Publication 1910817 ● Issue: 1 ● August 2017