Learn Mode
Selects the Learn Mode of the VF110-E feeder to be on or off. When on, the Bulk % of
Target, Bulk, and Dribble Vibration settings are adjusted according to target weight and
Learn Time (see previous).
Selection is color-coded to a quick, visual indication of the current setting. Selection appears
Red when Off or Green when On.
This selection is available from the Learn Mode screen.
Factory Setting: Off (Red)
Valid Entries: On (Green), Off (Red)
Bulk/Dribble and Elapsed Time
Displays time required for each stage of the fill cycle when using the Learn Mode. These
displays are for reference.
These selections are available from the Learn Mode screen.
Single Cycle
Initiates fill cycle one cycle at a time. This selection is for convenience. Fill cycles can also
be initiated using the footswitch of the Model VF110-E.
This selection is available from the Learn Mode screen.
Bulk % of Target, Bulk & Dribble Vibration
Settings of the Setup Recipe that are adjusted during Learn Mode. These settings will initial-
ly reflect entries of the current Setup Recipe in use, however, they will be changed during
Learn Mode filling.
These selections are available from the Learn Mode screen.
Main
Returns to the Main screen.
Menu Selection
Allows access to the Select, Setup, Scale, Test, and Stats screens during operation.
These selections are accessed from the Main screen.
Model VF110-E Touch Screen Control Panel Users Manual
21
AFI Publication 1910817 ● Issue: 1 ● August 2017
To Next Page
Loading...