INDEX
Model VF110-E Touch Screen Control Panel Users Manual
44
AFI Publication 1910817 ● Issue: 1 ● August 2017
APPENDIX, 37
Bucket Open Time, 27
Bucket Tare Delay, 27
Bucket Tare Rate, 27
Bulk % of Target, 24
Bulk % of Target, Bulk & Dribble Vibration,
21
Bulk Vibration, 24, 26
Bulk/Dribble and Elapsed Time, 21
Bulk/Dribble Time, 20
Calibrated Weight, 29
Cascade Vib On Delay, 26
Cascade Vibration, 26
Clear Stats, 22
Close Bucket, 31, 33
Completing Setup and Testing, 15
Control Panel, 1
CPM, 19
Dribble Vibration, 25, 26
Drop Time, 25
Elapsed Time, 20
Emergency Stop, 2
End of Fill Signal, 35
E-Stop Indicator, 35
Figure 1 – Control Panel, 1
Filling Production, 16
Gate Control, 28
Hopper Low Level Indicator, 34
Initial Testing and Adjustment, 8
Initiation Indicator, 34
INTRODUCTION, 1
Language, 22
Learn Mode, 20, 21
Learn Time, 20
Machine Testing, 8
Main, 11, 21
Main Screen, 2
Maximum Fill Time, 25
Menu and Selection Reference, 41
Menu Selection, 21
Minimum Fill Time, 25
Ok to Dump Signal, 35
On/Off Time, 28
Open Bucket, 31, 33
Picking a Recipe Number, 10
PreAct Weight, 23
Primary Vib, 26
Product Name, 23
Production Count, 19
Raw Counts, 29
REFERENCE, 19
Scale, 29
Scale Calibration, 15
Scale Weight, 29, 32, 23
Select, 22
Select Recipe Number, 22
Setting Up a Target Filling Weight, 11
Setting Up the Cascade Feeder, 13
Setting Up the VF110-E, 10
Setting Up Vibration, 12
Setting up Weigh Bucket, 14
Setup, 23
Setup Bucket, 27
Setup Level Control, 28
Setup Recipe Worksheet, 39
Setup Target Weight, 23
Setup Vibration, 24
Single Cycle, 20, 21
Start, 19
Start Cal., 29
Status Messages, 3, 18
Step #1-#4, 29
Stepper Sensor Indicator, 31, 32
Stepper Time, 31, 33
Stop, 19
Table 1 — Status Message
Troubleshooting, 18
Tare, 30, 32
Target Weight, 23
Test, 30
Test Aux I/O, 34
Test Cascade Vib, 32
Test Cascade Vibrator, 32
Test Prod. Request, 34
Test Product Request, 34
Test Vib, 30
Test Vib Gate #1/#2, 35
Test Vibrator, 30
Tolerance Weight, 24
Touch Screen Menus & Selections, 4
Touch Screen Operation, 2
Touch Screen Panel, 2
Troubleshooting and Service, 18
USING THE CONTROLS, 7
Using the Learn Mode, 17
Vibration Rate, 30, 32
To Previous Page
Loading...