Bulk/Dribble Time
Displays the time required to complete bulk and dribble filling in the most recent fill cycle.
These displays can be used in analysis of filling performance and where adjustment is nec-
essary.
These selections are accessed from the Main screen.
Elapsed Time
Displays the total time necessary to complete the most recent fill cycle. As with the previous
(“Bulk/Dribble Time”), this display can be used used in analysis of filling performance and
where adjustment is necessary.
This selection is accessed from the Main screen.
Single Cycle
Allows only a single container to be filled and is useful for testing purposes.
This selection is accessed from the Main screen.
The Learn Mode screen provides a method of allowing the controls to optimize filling pro-
duction automatically without time consuming adjustment and re-adjustment of setup entries
and selections.
A recommended procedure for using the Learn Mode with the Model VF110-E appears else-
where in this publication.
The Learn Mode screen is accessed from the Main screen and includes the following.
Learn Time
Specifies the number of fills per minute when using the Learn Mode to adjust the Bulk % of
Target, Bulk, and Dribble Vibration settings.
This selection is available from the Learn Mode screen.
Factory Setting: 0.000
Valid Entries: 5.000-30.000
Model VF110-E Touch Screen Control Panel Users Manual
20
AFI Publication 1910817 ● Issue: 1 ● August 2017
Learn Mode
To Next Page
Loading...