Setup Bucket
Bucket Tare Rate 0 1-30,000
Bucket Tare Delay 0.000 1.000-9.999
Bucket Open Time 0.000 0.200-9.999
Gate Control None (Red) With Fill (Green), Dribble Fill (Green),
None (Red)
Setup Level Control
Off Time 0.000 0.000-9.999
On Time 0.000 0.000-9.999
Scale
Scale #1 Calibration
Raw Count display @ @
Scale Weight display @ @
Calibrated Weight 0.000 0.000-999.999
Start Cal (press to start)
Step #1-#4 (press to calibrate)
Test
Test Vibrator
Vibration Rate 0.00 0.000-100.000
Test Vib (press to test)
Scale Weight display @ @
Tare (press to tare)
Stepper Sensor Indicator @ @
Stepper Time 0.000 0.050-9.999
Open Bucket (press to test)
Close Bucket (press to test)
Test Cascade Vibrator
Vibration Rate 0.00 0.000-100.000
Test Cascade Vib (press to test)
Scale Weight display @ @
Tare (press to tare)
Stepper Sensor Indicator @ @
Stepper Time 0.000 0.050-9.999
Open Bucket (press to test)
Close Bucket (press to test)
Test Product Request
Hopper Low Level Indicator @ @
Test Prod. Request Off On, Off
Test Aux I/O
Initiation Indicator @ @
E-Stop Indicator @ @
Test Vib. Gate #1 Off On, Off
Test Vib. Gate #2 Off On, Off
Ok to Dump Signal Off On, Off
End of Fill Signal Off On, Off
@ Display only
Model VF110-E Touch Screen Control Panel Users Manual
42
AFI Publication 1910817 ● Issue: 1 ● August 2017
To Next Page
Loading...