AT-S79 Management Software User’s Guide
Section I: Using the Menus Interface 119
6. To change the VLAN’s name, do the following:
a. Type C to select Change VLAN Name.
The following prompt is displayed:
Enter new VLAN name>
b. Type the new name for the VLAN and press Enter. A VLAN name
can be up to 32 characters and can include spaces.
7. To add a tagged port to the VLAN, do the following:
a. Type A for Add Member and press Enter.
The following prompt is displayed:
Add member->Enter port number >
b. Enter the number of the port and press Enter. You can add more
than one port at a time. You can specify the ports individually (i.e.,
2,5,11), as a range (i.e., 4-7), or both (i.e., 2,5,11-15).
The following prompt is displayed:
Select port tagging type (T/U)>
c. Type T to indicate a tagged port or U to indicate an untagged port.
8. To remove a tagged port from the VLAN, do the following:
a. Type R for Remove Member and press Enter.
The following prompt is displayed:
Delete number -> Enter port number >
b. Enter the number of the tagged port you want to remove and press
Enter. You can remove more than one port at a time. You can
specify the ports individually (for example, 2,5,11), as a range
(for example, 4-7), or both (for example, 2,5,11-15).
9. Type Q to select Quit to previous menu and save your changes.
To Next Page
Loading...
