Allied Telesis AT-S79 - Using the Menus Interface

Chapter 2: Getting Started with the Menus Interface
30 Section I: Using the Menus Interface
Using the Menus Interface
If you are using a DEC VT00 or ANSI (the default) terminal configuration,
refer to Table 1 for instructions on how to move through the menus and
select menu options.
When you press Enter to select a field in which you can enter a value, the
“>” symbol is displayed. For example:
Enter new password>
The “>” symbol indicates that you can enter a new value for the parameter
or change the existing value. After you have entered a value, press Enter.
Changes are immediately activated on the AT-GS950 Series switch.
Table 1. Menus Interface Operations
When directed to You must
Enter your selection Type the menu option letter.
Enter information (for
example, entering a port
number)
Type the information and press Enter.
Return to previous menu Type Q for Quit to Previous Menu.