AT-S79 Management Software User’s Guide
Section II: Using the Web Browser Interface 241
Rebooting a Switch
This procedure reboots the switch and reloads the AT-S79 management
software from flash memory. You may want to reboot the device if you
believe it is experiencing a problem.
Caution
The switch does not forward network traffic during the reboot
process. Some network traffic may be lost.
To reboot a switch, perform the following procedure:
1. From the Tools folder, select Reboot.
The Reboot page is shown in Figure 65.
Figure 65. Reboot Page
2. For the Reboot Type, select Normal Reset. This is the default setting.
To Next Page
Loading...
