AT-S79 Management Software User’s Guide
Section I: Using the Menus Interface 211
Displaying the RADIUS Client Settings
To display the RADIUS client status and settings, perform the following
procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
The Basic Switch Configuration Menu is shown in Figure 4 on page 34.
2. From the Basic Switch Configuration Menu, type U to select User
Interface Configuration.
The User Interface Configuration Menu is shown in Figure 7 on page
41.
3. Type R to select RADIUS Server Configuration.
The RADIUS Server Configuration Menu is shown in Figure 51 on
page 209. The top of the menu shows the current RADIUS server
configuration.
4. Type Q to return to the previous menu.
To Next Page
Loading...
