AT-S79 Management Software User’s Guide
Section I: Using the Menus Interface 55
Displaying Statistics
The procedure in this section describe how to display port statistics.
Displaying Port
Statistics
To display port statistics, perform the following procedure:
1. From the Main Menu, type S to select Statistics.
The Statistics Menu is shown in Figure 13.
Figure 13. Statistics Menu
2. Type S to select a port.
The following prompt is displayed:
Select port number>
3. Enter the number of the port whose statistics you want to view. Then
press Return.
Main Menu-> Statistics Menu
Port: 1 Elapsed Time Since System Reset: 000:00:11:54
<Counter Nam
e>
<Total>
<Avg./s>
Total RX Bytes 0 0
Total RX Pkts 0 0
Good Broadcast 0 0
Good Multicast 0 0
CRC/Align Errors 0 0
Undersize Pkts 0 0
Oversize Pkts 0 0
Fragments 0 0
Jabbers 0 0
Collisions 0 0
64-Byte Pkts 0 0
65-127 0 0
128-255 0 0
256-511 0 0
512-1023 0 0
1024-1522 0 0
-------------------------------<COMMAND>------------------------------
[S]elect/[N]ext/[P]rev. Port Since [U]p [R]eset [S]top Refresh [Q]uit
Command>
To Next Page
Loading...
