Chapter 3: Basic Switch Parameters
40 Section I: Using the Menus Interface
Setting the User Interface Configuration
This procedure explains how to adjust the user interface and security
features on the switch. With this procedure you can:
Change the console timer, used to automatically end inactive local
management sessions.
Change the AT-S79 management login user name and password.
Enable and disable the web server, used to manage the switch from a
remote management station with a web browser.
For information about how to configure a dial-in user, see Chapter 9, “Dial-
in User Configuration” on page 95.
To set the switch’s user interface configuration, perform the following
procedure:
1. From the Main Menu, type B to select Basic Switch Configuration.
The Basic Switch Configuration Menu is shown in Figure 4 on page 34.
2. From the Basic Switch Configuration Menu, type U to select User
Interface Configuration.
To Next Page
Loading...
