Alpha Technologies 100VA eLimiter+ User Manual

0120028-J0 Rev F
38
Figure 36 — Configuring LPS alarms
6�12 �1 Configuring a Fan Tray Alarm
When the fan tray is installed and connected to the CAN bus, it shows up as a signal in the Signals > View Live
Status screen as shown in Figure 37 The signal is named Fan Fail so an alarm can be generated if any of the six
fans fail. The steps on the next page show how to set up a custom alarm for the fan fail event.
Figure 37 — Fan tray Live Status

Alpha Technologies 100VA eLimiter+ Specifications

General

Brand	Alpha Technologies
Model	100VA eLimiter+
Category	Portable Generator
Language	English