0120028-J0 Rev F
6
1� Safety
SAVE THESE INSTRUCTIONS: This manual contains important safety instructions that must be followed during
the installation, servicing, and maintenance of the product. Keep it in a safe place. Review the drawings and il-
lustrations contained in this manual before proceeding. If there are any questions regarding the safe installation or
operation of this product, contact Alpha Technologies or the nearest Alpha representative.
1�1 Safety Symbols
To reduce the risk of injury or death, and to ensure the continued safe operation of this product, the following
symbols have been placed throughout this manual. Where these symbols appear, use extra care and attention.
NOTE:
A NOTE provides additional information to help complete a specic task or procedure.
Notes are designated with a checkmark, the word NOTE, and a rule beneath which the
information appears
CAUTION!
CAUTION indicates safety information intended to PREVENT DAMAGE to material or
equipment. Cautions are designated with a yellow warning triangle, the word CAUTION,
and a rule beneath which the information appears.
WARNING!
WARNING presents safety information to PREVENT INJURY OR DEATH to personnel.
Warnings are indicated by a shock hazard icon, the word WARNING, and a rule beneath
which the information appears.
HOT!
The use of HOT presents safety information to PREVENT BURNS to the technician or
user.
1�2 General Warning and Cautions
WARNING!
This system is designed to be installed in a restricted access location that is inacces-
sible to the general public.
1�3 Mechanical Safety
CAUTION!
Do not disassemble the product – call our qualied service centers for servicing. Incor-
rect reassembling may result in a risk of electrical shock or re.
Do not operate the product if it has received a sharp blow, it has been dropped, or oth-
erwise damaged in any way – return it to a qualied service center for repair.
To Next Page
Loading...
Need help?
General