Altivar Process ATV900 - [Canopen Baudrate] Bdco

Software Setup
38
NHA80945 04/2017
[CANopen Baudrate] bdCO
About This Parameter
This parameter defines the baud rate at which data is transferred. This parameter is taken into account
after a power cycle.
Access
This is a read/write parameter.
The parameter number is 6053.
Possible Settings
The table presents the parameter settings:
Settings Code Value Description
[50 kbps]
[125 kbps]
[250 kbps]
[500 kbps]
[1 Mbps]
50
125
250
500
1M
38
52
60
68
76
Baud rate is set to 50 Kbps.
Baud rate is set to 125 Kbps.
Baud rate is set to 250 Kbps.
Baud rate is set to 500 Kbps.
Baud rate is set to 1 Mbps.
Factory setting: 250 Kbps