Amada IS-200A - Special Notes; Safety Precautions

IS-200A
1. Special Notes
1-1
Denotes operations and practices that
may result in personal injury or
damage to the equipment if not
correctl
y
followed.
1. Special Notes
(1) Safety Precautions
Before using, read "Safety Precautions" carefully to understand the correct method of
use.
 These precautions are shown for safe use of our products and for prevention of
damage or injury to operators or others. Be sure to read each of them, since all of
them are important for safety.
 The meaning of the words and symbols is as follows.
Do not touch the inside of the Power Supply except as instructed.
The interior of this Power Supply carries high voltage. It is very dangerous to
touch any parts except as instructed. Do not touch.
When inspecting the interior of the Power Supply, be sure to turn off the power
source of the Power Supply and wait at least 5 minutes.
Never disassemble, attempt to repair, or modify the Power Supply.
These actions can cause electric shock and fire. Perform only the
maintenance described in the operation manual.
Never burn, destroy, cut, crush or chemically decompose the Power
Supply.
This product incorporates parts containing gallium arsenide (GaAs).
DANGER
!
Denotes operations and practices
that may imminently result in serious
injury or loss of life if not correctly
followed.
Denotes operations and practices
that may result in serious injury or
loss of life if not correctly followed.
!
These symbols denote
"prohibition". They are
warnings about actions
out of the scope of the
warranty of the product.
These symbols denote
actions which operators
must take.
Each symbol with a
triangle denotes that
the content gives
DANGER, WARNING
or CAUTION to the
operator.
DANGER
!
WARNING
!
CAUTION
!