IS-200A
2. Features
2. Features
The FINE SPOT-INVERTER IS-200A is a DC inverter-type, power supply specially
designed for spot welding and fusing.
The power supply is compact and convenient to transport or reposition. A monitor
function is provided to enable judgment of defective or non-defective welding.
Welding-current monitoring function for judgment of weld quality
Six control systems (Primary constant-current effective value control,
Secondary constant-current effective value control, Secondary constant-power
effective value control, Primary constant-current peak value control,
Secondary constant-voltage effective value control, and Constant-phase
control) for stable weld quality
Comes equipped with a current-shutoff function, which shuts off current in
response to external input (e.g., displacement of the electrode), ensuring stable
fusing.
Use of an inverter allows for high power factor and stable power conditions
Easy setting of a variety of items through the menu selection system
Four protective functions for maximum ease of operation
・Overcurrent-detection function
・No-current / no-voltage detection function
・Thermostat-fault detection function
・Self diagnostics
To Next Page
Loading...
