EasyManuals Logo

Ametek LS1 Series User Manual

Ametek LS1 Series
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
LS User Manual 25
7.2 EMERGENCY STOP
If for any reason, the machine needs to be stopped without delay, an emergency stop mushroom
switch is provided. Pressing the switch stops the LS machine immediately. It can be released by
turning a quarter-a-turn clockwise. The machine will then go to the initialized/start-up sequence if the
ON/OFF switch is already ON.
Emergency Stop Switch
7.3 SPLINTER SHIELDS
Transparent splinter shields are available as an option to enclose the test sample if there is any
danger of samples shattering as a result of the test. These shields can be tted with an electronic
interlock so that the test cannot be started until the hinged shield is closed. While not mandatory for
many applications and countries, LLOYD INSTRUMENTS strongly recommend that users consider
tting this optional item.
If a shield tted with electronic interlock is used, the following screen will appear if the door is opened
during a test.
ERROR condition
Splinter Shield Open
Press ENTER to cancel
The test in progress will be aborted and the next test or a new test will have to be started.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ametek LS1 Series and is the answer not in the manual?

Ametek LS1 Series Specifications

General IconGeneral
BrandAmetek
ModelLS1 Series
CategoryTest Equipment
LanguageEnglish

Related product manuals