Ametek LS1 Series - 12 Technical Specification; Technical Specification - LS1; Extended

LS User Manual 51
12.0 TECHNICAL SPECIFICATION
12.1 TECHNICAL SPECIFICATION LS1 STANDARD TRAVEL
Maximum Force (Tension and Compression) 1000N (225lbf)
Crosshead Travel Between Eye Ends 500mm (19.7in)
Throat Depth 180mm (7.1in)
Displayed Distance Resolution 0.01mm (.001in)
Crosshead Speed Range 0.01 to 2032mm/min (0.001-80in/min)
Crosshead Speed Accuracy - Unloaded +/-0.2% of Selected Speed - 2% to 100% of Max Speed
Crosshead Distance Accuracy - Unloaded +/-0.2% of Reading - 2% to 100% of Max Travel
Load Cell Force Accuracy +/-0.5% of Reading - 1% to 100% of Max Force
Internal Data Sampling Rate 8000Hz (8000 samples per second)
Data Transfer Rate Using NEXYGENPlus™ 1000Hz (1000 samples per second)
Operating Temperature 5°C to 35°C (40°F to 95°F)
Relative Humidity 20% to 85% (Non-Condensing)
Supply Voltage 115+/-10%VAC or 230+/-10%VAC
Supply Frequency 50-60Hz
Power Rating 115VAC @ 3.15A or 230VAC @ 2.5A
Fuses (2) for 115VAC & 230VAC Units T3A15H250V (3.15A Slow Blow Ceramic)
Flame Deection at Maximum Force 1.4mm (0.055in) Maximum
Weight of Machine 52kg (115lb)
12.2 TECHNICAL SPECIFICATION LS1 EXTENDED TRAVEL
Maximum Force (Tension and Compression) 1000N (225lbf)
Crosshead Travel Between Eye Ends 800mm (31.5in)
Throat Depth 180mm (7.1in)
Displayed Distance Resolution 0.01mm (.001in)
Crosshead Speed Range 0.01 to 2032mm/min (0.001-80in/min)
Crosshead Speed Accuracy - Unloaded +/-0.2% of Selected Speed - 2% to 100% of Max Speed
Crosshead Distance Accuracy - Unloaded +/-0.2% of Reading - 2% to 100% of Max Travel
Load Cell Force Accuracy +/-0.5% of Reading - 1% to 100% of Max Force
Internal Data Sampling Rate 8000Hz (8000 samples per second)
Data Transfer Rate Using NEXYGENPlus™ 1000Hz (1000 samples per second)
Operating Temperature 5°C to 35°C (40°F to 95°F)
Relative Humidity 20% to 85% (Non-Condensing)
Supply Voltage 115+/-10%VAC or 230+/-10%VAC
Supply Frequency 50-60Hz
Power Rating 115VAC @ 3.15A or 230VAC @ 2.5A
Fuses (2) for 115VAC & 230VAC Units T3A15H250V (3.15A Slow Blow Ceramic)
Fuses (2) for 230VAC Units T2A5H250V (2.5A Slow Blow Ceramic)
Flame Deection at Maximum Force 1.6mm (0.063in) Maximum
Weight of Machine 62kg (137lb)