Ametek LS1 Series - 9.2 Default Global Settings; 9.3 Editing Pre-defined Tests; 9.4 Password Access

LS User Manual 37
Rename Global Delete Setup
BkSp Clear All
Test < > Edit
9.2 DEFAULT GLOBAL SETTINGS
The Default Global Settings are:
Field Setting
Password <None>
Safety load 50N
Slow jog speed 25mm/min
Data format Printer
Grip protection Tension 110% of frame rating
Grip protection Compression 110% of frame rating
Language English
To enter a New Test Setup or Edit a pre-dened setup, proceed as follows.
9.3 EDITING A PRE-DEFINED TEST SETUP
To edit a previously dened test setup, select the required test, using the left and right arrow keys,
until the required test is displayed then press the Edit Soft Key.
This is the Select/Edit Display.
Select the required test
CYCLE_TEST (150 samples)
9.4 PASSWORD ACCESS
If the machine has been given a password, the password entry display will be shown.
Enter the password to edit this test
Type the password then press the ENTER key .
If the password is not correct, the test Select/Edit Display will be redisplayed.
If the password is correct, the main setup display is shown.
This is the Main Setup Display
Press a key to select an option
CYCLE_TEST
Pressing the ENTER key will return to the Select/Edit display.