4 LS User Manual
Printed below is a copy of an AMETEK Lloyd Instruments declaration that the LS you have
meets the requirements for CE marking. Actual copies of the certicate for your type of LS
may be obtained from AMETEK, Inc.
DECLARATION OF CONFORMITY
NAME AND ADDRESS OF MANUFACTURER
AMETEK Inc.
8600 Somerset Drive
Largo, FL 33773
United States
DESCRIPTION OF EQUIPMENT
Materials Testing System models LS1, TA1 & FT1
HARMONISED STANDARDS USED
A sample of this product has been accessed against the essential health and safety
requirements of th Low Voltage, Machinery and the EMC Directives listed below. Based on
conformity with the listed directivesm the below mentioned product is deemed in compli-
ance with the following:
BS EN 61010-1: 2001 Safety Requirements for Electrical Equipment
EN 61326-2-3: 2006 Electrical Equipment for Measurement, Control and Laboratory
use: Transducers with integrated or remote signal conditioning
EN 61326-1: 2006 Electrical Equipment for Measurement, Control and Laboratory
use: General requirements
2006-42-EC Machinery Directive
IDENTIFICATION OF SIGNATORY
PHILIP LACHANCE
Engineering Manager
DATE June 2011
To Next Page
Loading...
Need help?
General
