3.6. Lubrication and Maintenance Operations
Carry out lubrication and maintenance in regularly repeated intervals as per the everyday data reading on the counter of hours actu-
ally worked.
This Manual includes only the basic engine information, others are given in the Engine Operaion and Maintenance Manual which is
part of documentation supplied with the Machine.
Follow the instructions given in the Engine Operation and Maintenance Manual!
Following the rst 200 hours of new Machine operation or after the major overhaul, please carry out the operations under this
Section:
3.6.24. Oil change in the gearboxes
Following the rst 250 hours of new Machine operation or after the major overhaul, please carry out the operations under this
Section:
3.6.25. Valve adjustment
Removed or loose bolts, plugs, threaded joints of the hydraulics, etc. shall be tightened with the torque according to the charts in Sec-
tion 3.6.37 unless a dierent value is given with the relevant operation.
Carry out the inspection of the Machine located on at, solid surface secured against self-motion (scotch
blocks), and this always with the engine OFF, key removed from ignition box, and with the wiring dis-
connected (unless otherwise required).
To Next Page
Loading...
