Ammann AV 70 X - Oil Change in the Gearboxes

125AV 70 X
400627
1
1
400628
2
MAINTENANCE MANUAL
3.6.24. Oil change in the gearboxes
Oil draining:
Clean the places around the plugs.•
Place the machine so that the plug (1) is at the lowest posi-•
tion.
Dismount the plug (1), (2) and let the oil ow out to a con-•
tainer with a capacity of 15 l (3.96 US gal).
Note
Renew the oil when it is hot.
Change the oil after the rst 200 engine
hours.
Do not touch the gearbox and adjacent
parts if hot.
Catch the drained oil.
Dispose of according to legal
regulations.
Let the drained oil cool down below 50 °C
(120 °F).
Oil lling:
Place the machine so that the (1) is at the highest position. •
Fill in the recommended oil using the ller plug (1). •
Check of the oil level:
Check the oil level using the inspection hole 2. •
The oil level must reach the bottom edge of the hole or the •
oil must ow out slightly.
Remount the plugs; if the plug seals are damaged, remove •
them.