Ammann AV 70 X - How to Load the Machine

79AV 70 X
406007
8400 kg
(18 520 lb)
Lmin = 5 m
2x min 2100 kg
(2x min 4630 lb)
Lmin = 5 m
2x min 2100 kg
(2x min 4630 lb)
400143
1
400144
3
2
2
3
OPERATION MANUAL
2.8.1. How to load the Machine
Use loading ramps or a crane to load the Machine on its trans-
porting vehicle.
For loading with crane the Machine is tted with lifting lugs.
Observe safety regulations when load-
ing and unloading!
Use the crane of sucient loading
capacity!
Use corresponding and unbroken rig-
ging of sucient loading capacity!
The Machine must be tied to the lifting
lugs on the Machine!
Only a trained person (slinger) may carry
out the tying of the Machine!
Keep o the area beneath the hanging
load!
Before lifting, the Machine joint must be
secured against slight turning.
How to secure the joint:
Dismantle the arm (1).
Secure the arm with pivots (2) and safety pins locks (3).