80 AV 70 X
2.9. Special conditions of the machine use
2.9.1. Machine towing
To provide for towing the Machine is equipped with two lugs on
front frame, and with two lugs on rear frame.
A Machine sunk can be hauled for a short
distance if the engine is running and
the travel drive and steering do work.
Operator on towed Machine shall steer
the Machine in the direction of hauling.
Turn o the battery disconnector (51)
Raise the bonnet and secure it with a
support.
Travel pump short-circuiting:
Unscrew two multi-purpose relieve valves by three threads in
CCW direction (hexagon 22 mm).
Unless the engine works, or a defect ex-
ists within the hydraulic system, or travel
pump is broken, then you must brake
o the Machine and short-circuit the
hydraulic circuit. No person may stay on
the Machine towed!
When braked o and hydraulic circuit for
the travel is short-circuited, this means
that all the brakes are disabled!
Before braking o secure the Machine
with wooden scotch blocks against start-
ing to move!
Do NOT touch hot parts of the Machine,
burn hazard!
To Next Page
Loading...
