Ammann AV 70 X - Technical Data; Weights; Driving Properties; Drive

14 AV 70 X
1.3.1. Weights
Working weight with the cab ROPS according to EN 500 - 1 kg (lb) 7360 (16226)
front drum kg (lb) 3750 (8267)
rear drum kg (lb) 3610 (7959)
The service weight of the machine according to EN 500-1 is the machine weight with the full content of working liquids, half content
of propellants, half content of sprinkling tanks and with an operator (75kg/165lb).
The machine weight according to ISO 6016 is the weight with full content of propellants, lubricants, sprinkling tanks and an operator
(75kg/165 lb). It is calculated by adding 350 kg (772 lb).
The weight data can dier from above mentioned data according to the further customers’ requirements for the machine’s equipment
and accessories.
The maximum permissible weight of theAV 70 X machine including equipment and accessories is 9100 kg (20062 lb).
1.3.2. Driving properties
Drive type hydrostatic
Drive front and rear
Turning radius outer (contour) mm (in) 6410 (252,4)
Turning radius outer (edge) mm (in) 4600 (181,1)
Travelling speed in both directions - Speed 2000 km/h (MPH) 10,6 (6,6)
Travelling speed in both directions - Speed 2200 km/h (MPH) 11,4 (7,1)
Theoretical machine’s gradeability % 40
Side static stability - straight frame % 62,5
1.3.3. Drive
Steering type articulated joint
Steering control hydraulic
Linear hydraulic motors 2 + 1 (Crab)
Swing of frames in vertical plane ±° 8
Turning of both frames in horizontal plane ±° 34
1.3.4. Engine
Manufacturer Cummins
Engine type BTAA 3,3 - C80
Number of cylinders 4
Stroke volume cm3 (cu in) 3260 (198,9)
Engine output due to ISO 3046/1 kW (HP) 60 (80)
Nominal revolutions - CE min
-1
(RPM) 2000
Nominal revolutions min
-1
(RPM) 2200
Maximum torsional moment Nm (ft lb) 304 (224)
Fuel consumption during common operation/hour* l (gal US) max. 10 (2,6)
Engine fullls requirements of Directive 97/68/EU, STAGE III A
EPA/CARB NON ROAD 40 CFR, PART 89
TIER 3
* - according to ACZ methodology
1.3. Technical data