Ammann AV 70 X - 3.7. Defects

141AV 70 X
1
3
2
416040
416041
3
1
416040A
5
4
3
MAINTENANCE MANUAL
3.6.34. Adjust the scrapers
ADJUSTABLE SCRAPERS (Standard)
The machine is equipped with four adjustable scrapers.•
Setting of scrapers:
Slacken two screws on both sides of the scraper at point (1) •
and (2) and by moving the scraper in the oval-shaped hole
set up the correct function of the blade (3).
If the scraper is set in the oval-shaped hole at the maximum •
and the blade is worn-out, remove the blade and replace
with a new one.
Blade replacement:
Dismount the screws (4) and remove the blade (3) with •
strips (5).
Follow the above-mentioned steps in reverse order when •
mounting a new blade.
Correct setting of scrapers ensures per-
fect cleaning of the drum during the ma-
chine operation!
Set up the correct function of the scraper
upon the replacement of the blade!