3.6. Lubrication and Maintenance Operations
Detach at least one sprinkler from each pipe on the front •
and rear sides of the Machine. Store the sprinklers at a safe
place.
Switch ON the sprinkling pumps for 20 sec. so these become •
drained.
This procedure will guarantee you max drainage of the •
sprinkling circuit.
when all the abovementioned operations are completed, •
please proceed in reverse steps, clean thoroughly the indi-
vidual parts, rst.
By draining the water from the sprin-
kling circuit in time you will avoid any
potential damage that the manufacturer
shall bear no responsibility for!
To Next Page
Loading...
