Ammann AV 70 X - Ensurance of Safety Measures by the Owner; ROPS Cab

22 AV 70 X
2.1. Major Safety Precautions
2.1.1.3 Ensurance of safety measures by the
owner
User shall provide for the Machine to be operated merely •
under those conditions and only for those purposes it is
technically capable for under conditions set by manufactu-
rer and respective standards.
He must make sure the use of the Roller (Compacter) is used
•
merely in such a way and at such workplaces where there is
no hazard of making damage within nearby facilities, etc.
He shall provide for regular inspection of operation, tech-
•
nical condition, regular machine maintenance in cycles per
the Lubrication and Maintenance Manual. In cases of failing
technical condition of the Machine to such an extent it po-
ses hazard to safety of operation, persons, property or cau-
ses damage or impairs the environment, then the Machine
must be put out of operation until a defect is repaired.
He must specify who and what tasks may carry out under
•
operation, maintenance or repair of the Machine.
Any who drives the Machine (driver) and anybody who per-
•
forms Machine maintenance or repairs must get familiar with
the guidelines given in the Machine Operation Manual.
He shall provide for re extinguisher to undergo regular in-
•
spections.
He must ensure the “Machine Operation Manual” and Ope-
•
ration Logbook are stowed at certain place inside seat box
so always available to the driver.
He shall furnish constant supervision by an appointed per-
•
son during Machine operation under trac on public roads,
and he will in particular be liable to release instructions on
securing the work safety.
He must secure the removal of hazardous materials (fuel, oil,
•
cooling liquid, brake uid, etc.) from where these are spilled
depending on their nature so as to avoid their adverse im-
pact against environment, operation safety and persons’
health.
2.1.1.4. ROPS Cab
The ROPS cab must not be deformed and must not show •
signs of corrosion, cracks or breaks. It must be xedly con-
nected to the machine frame. No additional adjustments
of the cab may be performed without approval of the ma-
nufacturer as such adjustments can cause a reduction in its
strength. The screwed connections must comply with the
specication and must be tightened to the specied torque,
must be neither damaged nor deformed, and must not
show signs of corrosion.