3.6. Lubrication and Maintenance Operations
3.6.32. Cleaning of coolers
Due to various working conditions no regular cleaning interval can be set. •
In case of work in very dusty environment, perform daily cleaning. Cooler fouling will show in a reduced cooling performance and •
increased temperatures of engine coolant and of hydraulic oil.
Remove the cover.•
Do NOT clean the radiator with too high
pressure so to avoid its damage.
When radiator is contaminated with crude
oil products, use a cleaner and proceed
according to the manufacturer’s manual!
Find out a cause of contamination!
Clean the Machine at a workplace
equipped with cleaner collection system
to prevent soil contamination and water
resource contamination!
NEVER use forbidden cleaners!
3.6.33. How to clean cab ventilation lter
Remove the cover grill (1).•
Remove the lter element.•
Beat out the element carefully and wash in a detergent solu-•
tion. If lter element will become damaged or unable to be
made rid of the impurities, please replace it with new one.
Clean regularly 1 x per month. Should it
be you work in a very dusty environment
then the cleaning intervals should be cut
short.
Clean with compressed air or pressure water (steam). Clean •
in the direction from the fan side.
To Next Page
Loading...
