41AV 70 X
OPERATION MANUAL
Dashboard and control panels
1 – Travel controls
2 – Speed potentiometer
3 – Pushbutton for mode of soft starting to move and stopping to move
4 – CRAB mode resetting switch
5 – Pushbuttons for CRAB mode – front drum, to the right*
6 – CRAB pushbuttons – front drum, to the left*
7 – Vibration pushbuttons
8 – Emergency brake pushbutton
9 – Sprinkling pushbutton
10 – Sprinkling interval potentiometer
11 – Sprinkling pumps selector switch
12 – Ignition box
13 – Accelerator control
14 – Front / both / rear vibration selector switch
15 – Vibration amplitude selector switch
16 – Vibration mode selection switch (MAN/AUT)
17 – Combined switch
18 – Switch for constant speed and protection against engine overload
19 – Beacon switch (optional)
20 – Alarm lights switch
21 – Additional lights switch (optional)
22 - Switch + indicator lamp for rear lights
23 – lndicator lamps for lights (dipped/distance)
24 – Infrathermometer (optional)
25 – LH cluster
26 – RH cluster
27 – Cut-out box
28 – Cabin fuse
29 – Diagnostics socket
30 – Mounting socket
31 – Steering wheel position adjustment
32 – Operator seat
* If the Machine is equipped with cutter and nal compactor then pushbuttons (5) and (6) on the travel control (1) are used to
control it, and this on the same side where it has been mounted (optional).
To Next Page
Loading...
