Ampcontrol IPM V2 - Figure 4.15: IPM Relay Electrical Connections: Power Supply

Ampcontrol Pty Ltd – ABN 28 000 915 542
IPM V2 USER MANUAL
IPM2B003 Revision 15 – MAY/18
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 27 of 83
APPROVED FOR EXTERNAL DISTRIBUTION – PROPERTY OF AMPCONTROL PTY LTD – NOT TO BE REPRODUCED IN PART
4.4.11 Power Supply (Terminals 39 & 40)
Figure 4.15: IPM Relay Electrical Connections: Power Supply
The IPM can be supplied by either 24VAC or 24VDC.
4.4.12 Chassis Earth Connection
The earth connection on the rear of the IPM relay is a bolted connection. An earth conductor should be
secured to the chassis of the IPM using a ring lug.
IPM
Relay
39
IPM Pwr+
40
IPM Pwr-
24VDC or 24VAC
Supply