Ampcontrol Pty Ltd – ABN 28 000 915 542
IPM V2 USER MANUAL
IPM2B003 Revision 15 – MAY/18
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
APPROVED FOR EXTERNAL DISTRIBUTION – PROPERTY OF AMPCONTROL PTY LTD – NOT TO BE REPRODUCED IN PART
14.2 Equipment Maintenance
The IPM V2 relay system has no user-serviceable parts.
All repairs must be carried out by Ampcontrol only.
If a fault develops, return the product to Ampcontrol for repair. It is
essential that no attempt be made to repair the product as any
attempt to dismantle or repair the product can seriously compromise
the safety of the unit and voids product warranty.
It is recommended that the electrical protection system incorporating the relay be subject to regular
functional tests at intervals determined by risk assessment or FMEA. These intervals typically coincide
with periodic maintenance checks and will cover (but not limited to) tests such as those listed in the
commissioning section (Section 5).
14.3 Disposal
The electronic equipment discussed in this manual must not be
treated as general waste. By ensuring that this product is disposed of
correctly you will be helping to prevent potentially negative
consequences for the environment which could otherwise be caused by
incorrect waste handling of this product.
To Next Page
Loading...
