L0118G
6-9
When you press * to Save your new number, the
Display will briefly show “MACHINE SN SAVED” and
then prompt you with the question
“ USE FOR
CHANGER SN?”
“1 YES 2 NO”
If you choose YES, the number you just entered will
be reported in both the ID101 and the CA101 fields of
your DEX reports. Choose NO to retain the unique
serial number of your coin mech in CA101. (Use NO
unless you have a special reason for having this
special DEX reporting scheme.)
6.11 SALES BLOCKING
Four separate time periods in each day of the week
can be set, during which selections can be blocked
(prevented from vending). All or any combination of
selections in the vendor can be blocked from vending,
or are exempt from blocking (free to vend).
SET PERIODS 1-4
1. Enter the number (1-4) of the time period to
set-up. For example, choose #1.
2. The Display will prompt to enter the time
when sales blocking period #1 is to BEGIN.
Enter the time using the keypad, then press
“*” to SAVE as indicated. If you make a
mistake, press “#” to exit and then start over.
3. Select a.m. or p.m. for the starting time.
The “BEGIN PERIOD 1” and the time you’ve
entered will be displayed briefly and you will
be prompted to enter the END time.
4. Enter the time when sales blocking period #1
is to end, then press “*” to SAVE as
indicated.
5. Select a.m. or p.m. for the ending time.
NOTE: A time period can be started, for
example, at 9:00 p.m., and may be set to
end at 6:00 a.m. (which would be the
following day).
6. Now you are prompted to enter which days
of the week will use this blocking period.
Starting with Sunday, press “1” to set this
blocking period to be ON or OFF. Select “2”
to continue with the next day of the week.
7. After you save the setting for Saturday, you
will be prompted with the question
ALL SELECTIONS?
3-YES 4-NO
8. To block all selections in the vendor in time
period #1 select “YES”.
9. To choose different selections to block in
time period (#1 in this example) select “NO”.
As prompted, enter the selections one by
one to BLOCK or EXEMPT as desired. Any
combination of tray and column may be
blocked (for example, trays 3, 4 and 5, and
selections 61, 62 and 66).
10. In this Selection Entry display, enter the
number of the first selection. For example,
choose 10.
11. The display will show 10, and if it is blocked
or exempt.
12. Press the number “9” on the keypad anytime
to switch 10 from being blocked to being
exempt, or back again.
13. Press “#”on the keypad to exit - your choice
for this selection will be saved and you will
be prompted to enter the next selection – or
Press “*” for more options:
*-Saves setting for just this selection
1-Saves this setting to this Tray
2-Saves this setting to All Selections
14. After you’ve programmed all of the
selections in this manner, press “*” on the
keypad to return to the ENTER SELECTION
menu.
15. Repeat the process for the other selections
as desired or press “#” to return to save all of
your settings and return to main SALES
BLOCKING menu.
Note: If you are in these menus and go for
an extended time without making any
entries, the control will save entries as-is and
return to the Selection Entry display.
16. If you have different times, days, or
selections to block, return to 1-4 SET
PERIODS, choose another time period, then
repeat the times and days and selections
setting process following the same steps as
given above for time period #1.
17. The settings in sales blocking may be
changed at any time by selecting the time
period and changing the time of day, day of
the week, and/or selections.
6.12 CLOCK SETTINGS
1. TIME AND DATE – Enter the current time and
date. This information will be used for data logs
and error records.
# - Exit without saving (if you make a mistake)
*-Saves your setting
You will then be prompted to press 1 for AM, or 2
for PM. After you make this choice, you will be
prompted to enter the date.
Enter the 4 digits for today’s date. Press # to exit
without saving, or * to save. After you save the
date, you will be prompted to enter the year.
Again, Press # to exit without saving, or * to save
and return to the CLOCK SETTINGS Menu.
To Next Page
Loading...
