AMS 39 - Page 5

L0118G
ii
4.2 VENDOR PREPARATION 4-2
Inspection 4-2
Mounting and Connecting Bill
Validators and Card Readers 4-2
Mounting and Connecting Coin Changer 4-2
Connecting the MDB Devices 4-2
Configuring Motors 4-2
Test Loading and Configuration 4-3
Installing Price Labels 4-3
Scrolling Prices 4-3
Setting Prices 4-3
4.3 ON-SITE INSTALLATION 4-4
Remove Shipping Boards 4-4
Placing the Vendor in Location 4-4
Leveling the Vendor 4-4
False Leg Installation 4-4
Initial Power-Up and Cool-down 4-5
5 TRAY ADJUSTMENT AND
CONFIGURATION 5-1
5.1 SNACK, CANDY, AND FOOD TRAY 5-1
Removal 5-1
Installation 5-1
5.2. BOTTLE TRAY 5-1
Removal 5-1
Installation 5-1
5.3 TRAY VERTICAL POSITIONS 5-2
Removal 5-2
Installation 5-2
5.4 TRAY COLUMN POSITIONS 5-2
5.5 CHANGING DIVIDERS 5-2
5.6 CHANGING HELICES 5-2
5.7 HELIX ADAPTER 5-3
5.8 HELIX EJECTOR 5-3
5.9 HELIX ALIGNMENT DEVICE 5-3
5.10 MOTOR POSITIONS / HOME 5-3
5.11 BOTTLE TRIPPER BAR 5-3
5.12 AVOIDING PRODUCT HANG-UPS 5-3
5.13 TALL PRODUCT VENDING 5-3
5.14 CANDY PUSHER BAR INSTALLATION 5-3
5.15 OPTIONAL 1.5” HELIX TRAY 5-4
General Information 5-4
Tray Adjustment and Loading 5-4
6 SERVICE PROGRAMMING 6-1
6.1 SERVICE MODE 6-1
6.2 ERROR CODES 6-1
6.3 ACCOUNTING DATA 6-1
6.4 FILL / DISPENSE 6-1
6.5 DELAYED SALES 6-2
6.6 TEMPERATURE 6-2
Current Temperature 6-2
Setpoint Temperature 6-2
Start Log 6-2
View Log 6-2
NAMA Health Test 6-2
Edit Selection (H&S Exemptions) 6-2
6.7 PRICE SETTINGS 6-3
Set Prices 6-3
ValueVend 6-3
6.8 TRAY SETUP 6-3
Test Motors 6-3
Link Motors 6-4
Motor Type 6-4
Delayed Stop 6-4
Letter / Number 6-5
Configure 6-5
Coupled Motors 6-5
6.9 MDB (MULTI-DROP BUS) SETTINGS 6-6
Force Vend 6-6
No Cheat 6-6
Change Bill 6-6
Hold Lost Credit 6-6
Multi-Vend 6-6
Lev2 Coin Mech
2
6-6
Instant Revaluation 6-6
Hide Card Value 6-6
Card Refund 6-7
Special MDB-related Operation 6-7
6.10 OPTIONS 6-8
Message 6-8
Prize 6-8
Language 6-8
Primary 6-8
Secondary 6-8
Product Sensor 6-8
Speech 6-8
Serial Number 6-8
6.11 SALES BLOCKING 6-9
1-4 Set Period 6-9
All Selections 6-9
6.12 CLOCK SETTINGS 6-9
6.13 FREE VEND 6-10
6.14 AUXILIARY OUTPUT 6-10
6.15 DATA LOGS 6-10
6.16 ENERGYSENSIT 6-11
Enable 6-11
Clear History 6-11
Set Temp Chg 6-11
Set Patt Time 6-11
Set Hist Fact 6-11
Set Del 6-11
Lighting 6-11
Brightness 6-11
7 TROUBLESHOOTING 7-1
7.1 OUT OF SERVICE ERRORS 7-1
7.2 HEALTH AND SAFETY ERRORS 7-1