L0118G
9-2
EA401 Date of first DEX configuration
EA402 Time of first DEX configuration
EA403 Installation terminal/interrogator identification
during first DEX configuration
EA701 Number of power outages since last reset
EA702 Number of power outages since initialization
G8501 Record Integrity Check (least significant byte
first if DEX 5.0, most significant byte first if
DEX 6.0)
IC101
2
Machine serial number
IC106
2
Machine Asset Number
IC501
2
System Date (yymmdd)
IC502
2
System Time (hhmm)
IC504
2
System Daylight Savings Mode (OFF,
NA,EU, AUS,MEX)
ID101 Machine serial number
ID102 Machine model number
ID106 Machine Asset Number
ID107 DTS Level: “6”
ID108 DTS Revision: “0”
ID401 Decimal point position
ID402 Numeric Currency Code (ISO4217)
ID403 Alphabetic Currency Code
ID501 System Date (yymmdd)
ID502 System Time (hhmm)
ID504 System Daylight Savings Mode (OFF, NA,
MEX, EU, AUS)
MA501 “TEMP” (Machine Status)
MA502 Current Cabinet Temperature - °F
MA503 Current Cabinet Temperature - °C
MA501 “FAIL” (Machine is Out of Service)
MA502 Sum of bits describes failure:
(Sensor blocked or missing, all MDB devices
are out of order, Health & Safety)
PA101 Product number (set to the
selection number (e.g. 12)
PA102 Product price
PA103 Product Identification (Customer
Facing product name)
PA107 Selection Status (‘1’ if motor has been
unplugged, not sent if motor present)
PA201 Number of products vended since
initialization
PA202 Value of paid products since initialization
PA203 Number of products vended since last reset
PA204 Value of paid product sales since last reset
PA205 Number of discounted paid vends since
initialization
PA206 Value of discounts given since initialization
PA207 Number of discounted paid vends since last
reset
PA208 Value of discounts given since last reset
PA209 Number of surcharged paid vends since
initialization
PA210 Value of surcharged paid vends since
initialization
PA401 Number of free vends since initialization (not
sent if = 0)
PC101
2
Product number (one based index)
PC102
2
Product price
PC103
2
Product Identification
SD101
3
DDCMP Password
SD105
3
Reset All Interval Data (“AUTO”)
SD106
3
Reset Events Data (“AUTO”)
SE01 Number of Included Sets
SE02 Transaction Set Control Number: “0001”
TA201 Value of vend token sales since initialization
TA202 Number of vend token vends since
initialization
TA203 Value of vend token sales since last reset
TA204 Number of vend token sales since last reset
VA101 Value of all paid sales since initialization
VA102 Number of all paid vends since initialization
VA103 Value of all paid sales since last reset
VA104 Number of all paid sales since last reset
VA105 Value of all discounts since initialization
VA106 Number of all discounted paid vends since
initialization
VA107 Value of all discounts since last reset
VA108 Number of all discounted paid vends since
initialization
VA301 Value of all free vends since initialization
VA302 Number of all free vends since initialization
VA303 Value of all free vends since last reset
VA304 Number of all free vends since last reset
Notes:
1 Sending “EGS” (Door Openings) and
“EGT” (Door Closings)
2 These elements are transmitted to the VMC by the
DEX device to change settings
3 DDCMP is for special use only – contact AMS for
details
Receiving devices should not be designed to expect
any particular transmission order.
If firmware or BOOT is upgraded, installation numbers
are reset to zero.
Certain fields are omitted if all element values are
zero
To Next Page
Loading...
