AMX MST-1001 Configuration Manual

Programming
43
Modero S Series Touch Panels - Configuration & Programming Manual
Panel Commands (Cont.)
^KPS Set the keyboard passthru.
•Syntax:
"'^KPS-<pass data>'"
•Variables:
pass data:
<blank/empty> = Disables the keyboard.
0 = Pass data to G4 application (default). This can be used with VPC or text areas.
1 - 4 = Not used.
5 = Sends out data to the Master.
•Example:
SEND COMMAND Panel,"'^KPS-5'"
Sets the keyboard passthru to the Master. Option 5 sends keystrokes directly to the Master via the Send Output String
mechanism. This process sends a virtual keystroke command (^VKS) to the Master.
•Example 2:
SEND COMMAND Panel,"'^KPS-0'"
Disables the keyboard passthru to the Master.
Accepts keystrokes from attached USB keyboard or Virtual keyboard.
PKEYP Present a private keypad. Pops up the keypad icon and initializes the text string to that specified. Keypad displays a '*'
instead of the numbers typed. The Prompt Text is optional.
•Syntax:
"'PKEYP-<initial text>'"
•Variables:
initial text = 1 - 50 ASCII characters.
•Example:
SEND COMMAND Panel,"'PKEYP-123456789'"
Pops up the Keypad and initializes the text string '123456789' in '*'.
@PKP Present a private keypad. Pops up the keypad icon and initializes the text string to that specified. Keypad displays a '*'
instead of the numbers typed. The Prompt Text is optional.
•Syntax:
"'@PKP-<initial text>;<prompt text>'"
•Variables:
initial text = 1 - 50 ASCII characters.
prompt text = 1 - 50 ASCII characters.
•Example:
SEND COMMAND Panel,"'@PKP-1234567;ENTER PASSWORD'"
Pops up the Keypad and initializes the text string 'ENTER PASSWORD' in '*'.
@PWD Set the page flip password. @PWD sets the level 1 password only.
•Syntax:
"'@PWD-<page flip password>'"
•Variables:
page flip password = 1 - 50 ASCII characters.
•Example:
SEND COMMAND Panel,"'@PWD-Main'"
Sets the page flip password to 'Main'.
^PWD Set the page flip password. Password level is required and must be 1 - 4.
•Syntax:
"'^PWD-<password level>,<page flip password>'"
•Variables:
password level = 1 - 4.
page flip password = 1 - 50 ASCII characters.
•Example:
SEND COMMAND Panel,"'^PWD-1,Main'"
Sets the page flip password on Password Level 1 to 'Main'.
SETUP Send panel to SETUP page.
•Syntax:
"'SETUP'"
•Example:
SEND COMMAND Panel,"'SETUP'"
Sends the panel to the Setup Page.

AMX MST-1001 Specifications

General

Aspect ratio	16:9
Screen shape	Flat
Display diagonal	10 \
Touchscreen type	Tabletop
Display brightness	350 cd/m²
Display resolution	1280 x 800 pixels
Display technology	LED
Touchscreen technology	Resistive
Viewable size diagonal	256 mm
Contrast ratio (typical)	800:1
Display number of colors	16.78 million colors
Product color	Black
Ethernet LAN (RJ-45) ports	1
Display viewable area (HxV)	136 x 217 mm
Power supply type	DC
Power consumption (standby)	4.5 W
Power consumption (typical)	7.5 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 85 %
Operating relative humidity (H-H)	20 - 85 %
Wall mountable	No
HDMI ports quantity	0
Graphics card	AMX G4
Internal memory	512 MB
Internal memory type	DDR
RMS rated power	1.5 W

Weight and Dimensions

Depth (without stand)	103 mm
Width (without stand)	264 mm
Height (without stand)	157 mm
Weight (without stand)	5530 g