Anritsu MS2665C - Assembling Cabinet; Checking Items after Assembling Cabinet; Frequency Response Compensation

Section 4 MS2668C
4-26
4.2.6 Assembling cabinet
Refer to 4.3.1.
4.2.7 Checking items after assembling cabinet
Refer to 2.2.7.
4.2.8 Frequency response compensation
Perform Frequency response compensation, when one of the following modules is replaced. This Frequency response
compensation is not necessary, if the module you replaced does not belong to the following modules.
• A03 CPU • Switched Attenuator
• RF CONVERTER • Diplexing Bandswitch
• 2nd CONVERTER • OPEN LOOP YIG FILTER (F2626)
• F2626 MODULE • MLFP 1312 MODULE
• Switched Doubler • 40GHz H.MIXER
With regards to the method of performing Frequency response compensation, refer to 2.2.8.