Anritsu MS2665C - 7.2 Parts, PC board installation

7-3
7.2 Parts, PC board installation
7.2.1 Cabinet disassembly/assembly
Fig. 2-3-1 and 2-3-2 (for MS2665C) shows mechanical structure of the instruments (For MS2667/68C, see Fig. 3-3-1 and
3-3-2). To disassemble cabinet, perform procedures below.
(1) Remove eight feet.
(2) Draw enclosing cabinet backward and remove it.
(3) Remove rear panel
To assemble, perform inversely.
7.2.2 Parts/PCBs fitting for each option
7.2.2.1 Option 04 Hi-speed time domain sweep
Related units :
(1) A05 SCAN/AD
Additional parts :
(1) A0501 HI-SPEED AD constituent list (34Y106688)
Procedure :
Refer to paragraph 2.3.5 (for MS2665C) or paragraph 3.3.5 (for MS2667/68C).
(1) Connect A0501-X1 and A0501-X2 to A05-X6 and A05-X7.
(2) Fix A0501 to A05 with the strut and four screws.
(3) Turn on power, change option setting in Maintenance menu to OPT04 ON.
7.2 Parts, PC board installation