Anritsu MS2665C - 2.3 Mechanical Configuration

2-31
2.3 Mechanical configuration
2.3.1 Disassembling/Assembling cabinet
(1) Removing Feet (
1
to
8
)
Remove the S1/S2/S3 screws and remove the S3 screw of the rear.
(2) Removing around cover
10
Remove the four S1 screws (
1
to
4
) and remove the S3 screw of the rear.
Remove the around cover
10
to pull backward.
(3) Removing Front Frame
11
After (1) removing procedure, remove the
11
to pull forward.
To assemble, perform inversely.
Parts List
1
32E11805A Front foot
2
32E11805B Front foot
3
32E11806A Front foot Receiver
4
32E11806B Front foot Receiver
5
32E11807A Rear foot
6
32E11807B Rear foot
7
32E11808A Rear foot Receiver
8
32E11808B Rear foot Receiver
9
34Y107601 Tilt handle 3/4MW
10
333B35279 Around cover assembly
11
32E13058 Front frame
2.3 Mechanical configuration