Anritsu VNA master - G-2 Ethernet Configuration

G-2 Ethernet Configuration More About DHCP
G-2 PN: 10580-00305 Rev. J MS20xxC UG
To display the IP address with the instrument on, press the Shift key, then the System (8)
key, then the
System Options submenu key and the Ethernet Config submenu key. The IP address
will be displayed as shown in Figure G-1. The image on the display panel of your VNA Master
may differ from the image shown here.
Figure G-1. IP Address Assigned Using DHCP
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com