5-5 File Menu File Management
5-12 PN: 10580-00305 Rev. J MS20xxC UG
Save On ... Menu
In Spectrum Analyzer and Interference Analyzer modes, this menu is used to auto save
measurements to internal memory after specific events occur.
Key Sequence: File > Save On Event
... Crossing Limit
On Off: Press this soft key (submenu key) to toggle the Crossing Limit On
or Off. When On, measurements are saved to internal memory when the
measurement has crossed a defined limit line that has been created with the
Limit menu.
... Sweep Complete
On Off: Press this submenu key to toggle the Sweep Complete setting On
or Off. When On, measurements are saved to internal memory after the
current sweep is complete. When Off, a measurement is saved after every
sweep.
Save Then Stop
On Off: Press this submenu key to toggle the Save Then Stop setting On
or Off. When On, the sweep is stopped after a measurement is saved. When
Off with Sweep Complete On, a measurement is saved after every sweep.
Clear All: Press this key to turn Off all three save-on-event keys:
Crossing Limit
Sweep Complete
Save Then Stop
Back: Press this key to return to the “File Menu” on page 5-8.
Figure 5-13. Save On ... Menu
Back
Clear All
Save On ...
... Crossing Limit
On Off
... Sweep Complete
On Off
Save Then Stop
On Off
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com
To Next Page
Loading...
Need help?
General
